rsiot::drivers_i2c

Enum I2cDevices

Source 
pub enum I2cDevices<TMsg>
where
    TMsg: MsgDataBound,
{
    General(Config<TMsg>),
    ADS1115 {
        address: I2cSlaveAddress,
        inputs: Vec<InputConfig<TMsg>>,
    },
    BMP180 {
        address: I2cSlaveAddress,
        fn_output: fn(_: BMP180Data) -> Vec<Message<TMsg>>,
        oversampling: BMP180Oversampling,
    },
    DS3231 {
        address: I2cSlaveAddress,
        fn_input: fn(_: Message<TMsg>) -> Option<InputData>,
        fn_output: fn(_: OutputData) -> Option<Vec<Message<TMsg>>>,
        fn_output_period: Duration,
    },
    PCA9555 {
        address: I2cSlaveAddress,
    },
    PCF8575 {
Show 17 fields
        address: I2cSlaveAddress,
        pin_00: PCF8575PinMode<TMsg>,
        pin_01: PCF8575PinMode<TMsg>,
        pin_02: PCF8575PinMode<TMsg>,
        pin_03: PCF8575PinMode<TMsg>,
        pin_04: PCF8575PinMode<TMsg>,
        pin_05: PCF8575PinMode<TMsg>,
        pin_06: PCF8575PinMode<TMsg>,
        pin_07: PCF8575PinMode<TMsg>,
        pin_10: PCF8575PinMode<TMsg>,
        pin_11: PCF8575PinMode<TMsg>,
        pin_12: PCF8575PinMode<TMsg>,
        pin_13: PCF8575PinMode<TMsg>,
        pin_14: PCF8575PinMode<TMsg>,
        pin_15: PCF8575PinMode<TMsg>,
        pin_16: PCF8575PinMode<TMsg>,
        pin_17: PCF8575PinMode<TMsg>,
    
},
    PM_DI16(Config<TMsg>),
    PM_RQ8(Config<TMsg>),
    SSD1306 {},
}
Expand description

Конфигурации устройств по шине I2C

Variants§

§

General(Config<TMsg>)

Общее устройство

§

ADS1115

Аналого-цифровой преобразователь

Fields

§address: I2cSlaveAddress

Адрес. Зависит от подключения входа ADDR:

  • GND - 0x48
  • VDD - 0x49
  • SDA - 0x4A
  • SCL - 0x4B
§inputs: Vec<InputConfig<TMsg>>

Настройка входов

§

BMP180

Датчик давления BMP180

Fields

§address: I2cSlaveAddress

Адрес. По-умолчанию 0x77

§fn_output: fn(_: BMP180Data) -> Vec<Message<TMsg>>

Функция преобразования данных в исходящие сообщения

§oversampling: BMP180Oversampling

Кол-во измерений для определения значения

§

DS3231

Часы реального времени DS3231

Fields

§address: I2cSlaveAddress

Адрес. По-умолчанию 0x68

§fn_input: fn(_: Message<TMsg>) -> Option<InputData>

Функция преобразования входящих сообщений в данные для записи в модуль

§fn_output: fn(_: OutputData) -> Option<Vec<Message<TMsg>>>

Функция преобразования данных с модуля в исходящие сообщения

§fn_output_period: Duration

Период чтения данных с часов

§

PCA9555

Расширение GPIO PCA9555

Fields

§address: I2cSlaveAddress

Адрес. По-умолчанию 0x20

§

PCF8575

Расширение GPIO PCF8575

Fields

§address: I2cSlaveAddress

Адрес

§pin_00: PCF8575PinMode<TMsg>

Настройка пина P00

§pin_01: PCF8575PinMode<TMsg>

Настройка пина P01

§pin_02: PCF8575PinMode<TMsg>

Настройка пина P02

§pin_03: PCF8575PinMode<TMsg>

Настройка пина P03

§pin_04: PCF8575PinMode<TMsg>

Настройка пина P04

§pin_05: PCF8575PinMode<TMsg>

Настройка пина P05

§pin_06: PCF8575PinMode<TMsg>

Настройка пина P06

§pin_07: PCF8575PinMode<TMsg>

Настройка пина P07

§pin_10: PCF8575PinMode<TMsg>

Настройка пина P10

§pin_11: PCF8575PinMode<TMsg>

Настройка пина P11

§pin_12: PCF8575PinMode<TMsg>

Настройка пина P12

§pin_13: PCF8575PinMode<TMsg>

Настройка пина P13

§pin_14: PCF8575PinMode<TMsg>

Настройка пина P14

§pin_15: PCF8575PinMode<TMsg>

Настройка пина P15

§pin_16: PCF8575PinMode<TMsg>

Настройка пина P16

§pin_17: PCF8575PinMode<TMsg>

Настройка пина P17

§

PM_DI16(Config<TMsg>)

Коммуникация с модулем PM-DI16

§

PM_RQ8(Config<TMsg>)

Коммуникация с модулем PM-RQ8

§

SSD1306

Коммуникация с LED-экраном

Trait Implementations§

Source§

impl<TMsg> Clone for I2cDevices<TMsg>
where TMsg: MsgDataBound + Clone,

Source§

fn clone(&self) -> I2cDevices<TMsg>

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

Auto Trait Implementations§

§

impl<TMsg> Freeze for I2cDevices<TMsg>

§

impl<TMsg> RefUnwindSafe for I2cDevices<TMsg>

§

impl<TMsg> Send for I2cDevices<TMsg>

§

impl<TMsg> Sync for I2cDevices<TMsg>

§

impl<TMsg> Unpin for I2cDevices<TMsg>

§

impl<TMsg> UnwindSafe for I2cDevices<TMsg>

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
§

impl<T> Erasable for T

§

const ACK_1_1_0: bool = true

Whether this implementor has acknowledged the 1.1.0 update to unerase’s documented implementation requirements. Read more
§

unsafe fn unerase(this: NonNull<Erased>) -> NonNull<T>

Unerase this erased pointer. Read more
§

fn erase(this: NonNull<Self>) -> NonNull<Erased>

Turn this erasable pointer into an erased pointer. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<G1, G2> Within<G2> for G1
where G2: Contains<G1>,

§

fn is_within(&self, b: &G2) -> bool

§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> MaybeSendSync for T